2.3 Assign a device to a fixture and position

When the device is part of the same WiFi network as the manager, you will be able to see it from the manager.

In order for SmartCircle to function properly, each device that needs to be secured must be connected to a manager and assigned a fixture and position. 

Please note that once a device is assigned it need some time to pick up the configuration and campaign information. During this time the device cannot be armed.

Method one

The display device must be on the same WiFi network as the manager so it can be controlled and assigned to a fixture and position. Please note that once a device is assigned it needs some time to pick up the configuration and campaign.

  1. Open the SmartCircle Manager app on your Android device.
  2. Select a location from your list of Selected or Available locations. You should see your location’s first fixture.
    1. If your location is empty you will be asked if you want to Auto assign your devices. View section A6 for more information.
  3. Swipe the screen to view the rest of the fixtures available to that location. (Scr. 0002-14)
  4. Go to Location Settings, which is the last page after all fixtures. (Scr. 0002-15)
  5. Select Assignments to enter the Assignments page. The page is split between devices based on their SmartCircle apps all located to the WiFi within the current location. (Scr. 0002-16)
Select the device you wish to assign and then fixture and display position and click on the Assign button. (Scr. 0002-17)

Scr. 0002-14

Scr. 0002-15

Scr. 0002-16

Scr. 0002-17

 

Method two

  1. Open the SmartCircle Manager app on your Android device.
  2. Select a location from your list of Selected or Available locations. You should see your location’s first fixture.
    1. If your location is empty you will be asked if you want to Auto-assign your devices. View section A6 for more information.
  3. Swipe the screen to view the rest of the fixtures available to that location. (Scr. 0002-14)
  4. Click on an empty space inside the fixture page to assign a device to that position.
  5. Select a device from the Assignments page that opens up. (Scr. 0002-16)
    1. If a device is assigned to another position it will have a fixture and position number by its name. Selecting that device will unassign it from its current position.
  6. Confirm device name, fixture, and position then click on the Assign button from the bottom. (Scr. 0002-17)
  7. Once done you will be redirected to the Assignments page. (Scr. 0002-16)
Confirm the device has been assigned properly by looking at the display device main screen. (Scr. 0003-4)

Scr. 0002-14

Scr. 0002-16

Scr. 0002-17

Scr. 0003-4