Skip to content
English
More support Sign in
Go to SmartCircle web app
  • There are no suggestions because the search field is empty.

User Guide - Enroll an Android device to a fixture and position

 

The following steps are necessary to assign the device to a specific position and fixture if the device was enrolled with a General QR code or basic installation.

The device must have an internet connection to download campaigns and pick up security configurations.

Steps: 

  1. Open Display 4. 
    1. If the application doesn't immediately show you information about the device, then the device has already been assigned to a position and fixture. Access the enrollment page and confirm that you can see the device in one of your planogram positions.
    2. If the app displays a list of information with no location, fixture, position, nor campaign, tap the Enroll this device button. display4-no_location
  2. Enter the ten (10) digits enrollment code and click Validate.
  3. Select the fixture and position.
position and fixture

Make sure that the position is empty unless this device is intended to replace another device.

  • *If there is a specific SKU ID for the device:
      1. Tap the SKU dropdown
      2. Select the specific SKU for the device
        SKU SKU select

4.  Tap Assign.

Now Display 4 should show you the current information about the mobile device. Including a location, fixture, position, and possibly a campaign*.

enrolled-device

  • Campaign updates may take time, depending on size and internet speed.
  • Note: On some devices (especially Huawei), SmartCircle is hidden from the launcher for security reasons. To access it, open SmartCircle RM and tap Open Display.

Video: